More in the continuing analysis of Fuji X series EXIF
Additional flash settings from recent X series cameras (X-T30 and X-T3)
===============================================
Tag 0x1010
Currently we have:
0xa920 => '1st Curtain (front)', #10 (EF-X500 flash)
0xc920 => '2nd Curtain (rear)', #10
These apply to standard TTL
The X-T3 and X-T30 also have:
- Standard TTL
0xad20 => 'TTL - Red-eye Flash - 1st Curtain (front)',
0xcd20 => 'TTL - Red-eye Flash - 2nd Curtain (rear)',
- TTL Slow
0xaa20 => 'TTL Slow - 1st Curtain (front)',
0xca20 => 'TTL Slow - 2nd Curtain (rear)',
0xae20 => 'TTL Slow - Red-eye Flash - 1st Curtain (front)',
0xce20 => 'TTL Slow - Red-eye Flash - 2nd Curtain (rear)',
- TTL Auto
0xab20 => 'TTL Auto - 1st Curtain (front)',
0xcb20 => 'TTL Auto - 2nd Curtain (rear)',
0xaf20 => 'TTL Auto - Red-eye Flash - 1st Curtain (front)',
0xcf20 => 'TTL Auto - Red-eye Flash - 2nd Curtain (rear)',
0x8320 => 'TTL Auto - Flash didn't fire',
The X-T3 also has Flash Commander TTL mode
0x9860 => 'Flash Commander',
===============================================
Tag 0x140a - Red-eye Removal
Value 0 - Red-eye Removal Off
Value 4 - Red-eye Removal On
================================================
X-T3 Flash Manual link
http://fujifilm-dsc.com/en/manual/x-t3/taking_photo/flash/index.html
Great, thanks!
- Phil
And here is the format for tag 0x140a
[int16u] Fuji Film 0x140a : 0
Thanks. I knew about bit 2 of 0x140a already, but I haven't added it because none of the other bit values are known.
- Phil
Thanks for the update - I've tested the FujiFlashMode values I'm aware of and they look good.