Hi,
Apologies if this is a bit of a newbie question. I'm so close (yet so far) from having solved a big problem but I'm just missing a small piece of the solution. Basically, I want to write into the "egBarc:Code" field here:
<x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='Image::ExifTool 9.32'>
<rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'>
<rdf:Description rdf:about=''
xmlns:egBarc='http://ns.esko-graphics.com/barcode/1.0/'
xmlns:egBarcL='http://ns.esko-graphics.com/barcodelist/1.0/'>
<egBarcL:barcodes>
<rdf:Bag>
<rdf:li rdf:parseType='Resource'>
<egBarc:Code>Xxx</egBarc:Code>
</rdf:li>
</rdf:Bag>
</egBarcL:barcodes>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>
...but when I write to it, I end up with:
<x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='Image::ExifTool 9.32'>
<rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'>
<rdf:Description rdf:about=''
xmlns:egBarc='http://ns.esko-graphics.com/barcode/1.0/'
xmlns:egBarcL='http://ns.esko-graphics.com/barcodelist/1.0/'>
<egBarcL:barcodes rdf:parseType='Resource'>
<egBarc:Code>ooops</egBarc:Code>
</egBarcL:barcodes>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>
I'm using the command:
exiftool /Users/Admin/Desktop/barcode.pdf -barcodes={Code=ooops}
And I've modified my Exiftool_config file to look like this:
%Image::ExifTool::UserDefined = (
# new XMP namespaces (ie. xxx) must be added to the Main XMP table:
'Image::ExifTool::XMP::Main' => {
egBarcL => { # <-- must be the same as the NAMESPACE prefix
SubDirectory => {
TagTable => 'Image::ExifTool::UserDefined::egBarcL',
# (see the definition of this table below)
},
},
# add more user-defined XMP namespaces here...
},
);
# This is a basic example of the definition for a new XMP namespace.
# This table is referenced through a SubDirectory tag definition
# in the %Image::ExifTool::UserDefined definition above.
# The namespace prefix for these tags is 'xxx', which corresponds to
# an ExifTool family 1 group name of 'XMP-xxx'.
%Image::ExifTool::UserDefined::egBarcL = (
GROUPS => { 0 => 'XMP', 1 => 'XMP-egBarcL', 2 => 'Image' },
NAMESPACE => { 'egBarcL' => 'http://ns.esko-graphics.com/barcodelist/1.0/' },
WRITABLE => 'string',
# barcodes => { List => 'Bag',
# },
barcodes => {
# the "Struct" entry defines the structure fields
Struct => {
# optional namespace prefix and URI for structure fields
# (required only if different than NAMESPACE above)
NAMESPACE => { 'egBarc' => 'http://ns.esko-graphics.com/barcode/1.0/' },
# optional structure name (used for warning messages only)
STRUCT_NAME => '',
Code => { Writable => 'string' },
Magnification => { Writable => 'string' },
Type => { Writable => 'string' },
},
},
);
#------------------------------------------------------------------------------
1; #end
Can anyone show me what I'm doing wrong here? I assume my Exiftool_config is wrong... but how?
Thanks in advance,
Rob
Hi Rob,
Very close.
You just need to add List => 'Bag', to your "barcodes" tag. I see you have commented out a line with this in it. Maybe you are missing the syntax:
barcodes => {
List => 'Bag',
Struct => {
NAMESPACE => { 'egBarc' => 'http://ns.esko-graphics.com/barcode/1.0/' },
STRUCT_NAME => 'Barcodes',
Code => { },
Magnification => { },
Type => { },
},
},
Also, since you defined the default WRITABLE type in your tag table, you don't need to define the individual Writable types for each tag if the are the same (all "string").
BTW, the STRUCT_NAME isn't used in writing the XMP, and is only used for ExifTool warning messages if there are any problems.
- Phil
Edit: Oops. You wanted the entire structure in a Bag, not just the Code tag -- moved 'Bag' definition up to the "barcodes" level.
Hi Phil,
Thanks so much for that, very helpful.
There's just one small snag, which is my fault for not giving a clearer example. In short, when I write multiple fields, for example:
exiftool /path/to/my/file.pdf -barcodes={{Code=YYYYY,Type=XXXXXX,Magnification=1}}
...then I get...
<rdf:Description rdf:about=''
xmlns:egBarc='http://ns.esko-graphics.com/barcode/1.0/'
xmlns:egBarcL='http://ns.esko-graphics.com/barcodelist/1.0/'>
<egBarcL:barcodes>
<rdf:Bag>
<rdf:li rdf:parseType='Resource'>
<egBarc:Code>YYYYY</egBarc:Code>
</rdf:li>
<rdf:li rdf:parseType='Resource'>
<egBarc:Type>XXXXXX</egBarc:Type>
</rdf:li>
<rdf:li rdf:parseType='Resource'>
<egBarc:Magnification>1</egBarc:Magnification>
</rdf:li>
</rdf:Bag>
</egBarcL:barcodes>
Where what I actually want is...
<rdf:Description rdf:about=''
xmlns:egBarc='http://ns.esko-graphics.com/barcode/1.0/'
xmlns:egBarcL='http://ns.esko-graphics.com/barcodelist/1.0/'>
<egBarcL:barcodes>
<rdf:Bag>
<rdf:li rdf:parseType='Resource'>
<egBarc:Code>YYYYY</egBarc:Code>
<egBarc:Type>XXXXXX</egBarc:Type>
<egBarc:Magnification>1</egBarc:Magnification>
</rdf:li>
</rdf:Bag>
</egBarcL:barcodes>
Any idea where I'm going wrong?
Thanks again,
Rob
Hi Rob,
No idea (other than the incorrect bracing, which should give an error). With the config definition i posted, I get this:
> exiftool a.xmp '-barcodes={Code=YYYYY,Type=XXXXXX,Magnification=1}'
1 image files created
> cat a.xmp
<?xpacket begin='' id='W5M0MpCehiHzreSzNTczkc9d'?>
<x:xmpmeta xmlns:x='adobe:ns:meta/' x:xmptk='Image::ExifTool 9.35'>
<rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'>
<rdf:Description rdf:about=''
xmlns:egBarc='http://ns.esko-graphics.com/barcode/1.0/'
xmlns:egBarcL='http://ns.esko-graphics.com/barcodelist/1.0/'>
<egBarcL:barcodes>
<rdf:Bag>
<rdf:li rdf:parseType='Resource'>
<egBarc:Code>YYYYY</egBarc:Code>
<egBarc:Magnification>1</egBarc:Magnification>
<egBarc:Type>XXXXXX</egBarc:Type>
</rdf:li>
</rdf:Bag>
</egBarcL:barcodes>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>
<?xpacket end='w'?>
Writing multiple barcodes structures can be done either by assigning more "barcodes" elements in the same command:
exiftool '-barcodes={code=a,type=b,magnification=1}' '-barcodes={code=x,type=y,magnification=2}' FILE
or added to existing barcodes using +=:
exiftool '-barcodes+={code=x,type=y,magnification=2}' FILE
or written as a list
exiftool '-barcodes=[{code=a,type=b,magnification=1},{code=x,type=y,magnification=2}]' FILE
Also, you can of course write using the flattened tag names too if you want, but it is harder to keep multiple structures organized like this.
And one more thing: I notice that Magnification should probably be 'real', not 'string'-type.
- Phil
Absolutely spot on! Thanks for your help, much appreciated!