Pentax K-3iii "Roll Angle" and "Pitch Angle"

[kypfer]

I've used ExifTool "as required" for some while now, mostly with a range of Pentax DSLR cameras, and those that have the Electronic Levels feature will report any Pitch and Roll data in the EXIF.
Until now ... where I find my K-3iii images always report zero pitch or roll angle, irrespective of the camera's attitude.
I use the in-viewfinder electronic levels, so I know the camera is tilted ... just sometimes I'd like to know by how much.
If this is a feature (or failure) of the camera, so be it, but if it's a characteristic that ExifTool can be made aware of it'd be useful
TIA

[StarGeek]

If exiftool doesn't list it, then it's not in the file.

Such info may be available for a Pentax k-5 (see Pentax LevelInfo Tags) but may not be for other models.  You'll have to check your camera manual to see.

[Phil Harvey]

The LevelInfo was first decoded for the K-5, and it appears to be valid for the K-3 and K-3ii.  The LevelInfo was 8 bytes for these models, but is 25 bytes for the K-3iii.  It looks like I have to update the the decoding of this for the newer models.  I may need a few samples -- I'll let you know.

- Phil

[kypfer]

The LevelInfo was first decoded for the K-5, and it appears to be valid for the K-3 and K-3ii.  The LevelInfo was 8 bytes for these models, but is 25 bytes for the K-3iii.  It looks like I have to update the the decoding of this for the newer models.  I may need a few samples -- I'll let you know.
- Phil

Thanks
The existing LevelInfo also seems to be valid for the K-70 and the KP ... I have both cameras. It's only the K-3iii I'm having an issue with.
Samples would be no problem. If there's anything more than just a couple of random snaps you'll need, let me know details of what you need and I'll do my best.